8K Mirror Stainless Steel Sheet Processing Process

The basic plates of Mirror 8k stainless steel are mostly 2B and BA.

it is necessary to mix the grinding liquid during the product process: mix water, nitrate acid, iron-red powder, etc. according to a certain ratio to make a grinding liquid. Moreover, the better the ratio is deployed, the higher the quality of the product.

First step – Rough polishing

Rough polishing is generally done with water. Moreover, it uses six sets of grinders. Then, people arrange the grinding wheels in order from coarse to fine to grind stainless steel. This can remove defects such as roughness, burrs, and trachoma on the surface of stainless steel.

Moreover, the grinding has a certain depth, most of which are within 2c.

After obtaining a certain extent in this way. And then, people finely polish it.

Second step – Fine polishing

This group of grinding machines uses high-density wool felt. Moreover, the higher the density of wool felt, the better. Then, people add slurry.

This removes the oxide layer, sand marks, grinding headlines, etc. on the surface of the stainless steel. Therefore, it improves the luminosity of stainless steel. Moreover, the finely polished stainless steel can reflect the details of the article.

Third step – Washing and drying

After polishing, people use a brush dipped in clean water to clean the surface of the stainless steel. Moreover, the finer the brush, the cleaner the water and the cleaner the product.

Then, people use a baking lamp to dry the water on stainless steel.

Fourth step – Quality inspection

After processing the surface of stainless steel, people also need to check the breadth of stainless steel, blisters, dark bones, scratches, and whether the product is deformed, and whether the grinding head is within the standard range.

Otherwise, the quality of the product is not up to standard.

The final step – Packing with protective film

The finished mirror is 8k stainless steel, and people will put a protective film on it. Moreover, stainless steel cannot leak edges, and the protective film must be cut neatly. And then, people can pack the finished mirror 8K stainless steel in a box.

More about the 8K Mirror process imformation , pls follow:www.grandstainless.com